If you smell gas in a Butner home, get out and call 911 or Enbridge Gas North Carolina at 1-877-776-2427 from outside. For new appliance lines, leak repair past the meter or a bonding check on flexible tubing, call the number on this page to be connected with a local plumber in Butner.
About Butner's homes and gas
Butner sits on I-85 in southwestern Granville County, about 13 miles from Durham, laid out on the old Camp Butner grid with its numbered and lettered streets. It became a town in 2007 after decades under state management. Most of its housing dates from the 1980s through the 2000s: Census survey figures put the median build year at 1991, with about 29% of homes built before 1980. Enbridge Gas North Carolina lists Granville County among its service counties, but availability on a given street hasn't been verified, so check with Enbridge if your home isn't already on gas.
For gas piping, that housing age means most Butner jobs involve fairly modern systems: adding a branch for a range, dryer or tankless water heater, replacing a connector during an appliance swap, or confirming that CSST tubing has its bonding connection. Homes from before 1980 are more likely to have threaded iron pipe and older fittings worth testing before new work is tied in.
Steps if you suspect a leak
- If there's a strong odor, leave right away and don't touch switches or thermostats.
- Call 911 or Enbridge's emergency line from a safe distance.
- Let the utility shut off the supply and check the house.
- Don't try to trace the leak yourself with a flame, a lighter or by sniffing along the pipes.
- Book a plumber to locate the leak, repair the fitting or connector and pressure test the line.
- Make sure carbon monoxide alarms are working before relighting appliances.
What you might see and why
| Symptom | Likely cause |
|---|---|
| Odor around a range or dryer | Worn connector or loose fitting |
| Hiss near the meter | Leak at a union or valve on the house side |
| Tankless heater faults during heavy use | Gas line too small for the load |
| Orange burner flames | Burner needs cleaning or adjustment |
| CSST with no ground clamp visible | Missing bonding connection |
Cost drivers
- Distance and route. Crawl space runs are simpler than finished walls.
- Load. Adding an appliance may require upsizing pipe from the meter.
- Material. Iron pipe and CSST involve different labor.
- Corrections. Missing bonding or bad fittings found during the job.
- Permitting. Granville County handles building permits for the Town of Butner, with zoning through the Town. Permit and inspection time are part of the job.
Gas Line Services questions in Butner
Where does the gas utility's responsibility stop and mine start?
Can a plumber add a gas line for a new range, dryer or water heater?
Who handles the permit for gas piping work here?
What is the yellow flexible tubing on my gas lines, and does it need bonding?
More plumbing services in Butner
Gas Line Services nearby
Helpful guides
Sources
Last updated: